Sparkling Clean Bathroom with Soft Soap and Vinegar – Your Simple Step-by-Step Guide
Sara IdenforsWould you like a bathroom that shines without harsh chemicals? With natural and effective products such as soap and vinegar, you can easily remove dirt, limescale, and stains. Follow our step-by-step guide for a clean and fresh bathroom!
1. Easily and effectively clean both the inside and outside with bathroomsoap - apply the toilet brush to the inside.
2. For daily cleaning, bathroom soap spray and a soft cloth are sufficient.
For deep cleaning and thorough cleaning:
1. Apply bathroom soap directly into the toilet bowl, leave it overnight if possible, and scrub with the toilet brush.
2. If limescale deposits and discoloration remain after cleaning with soap, you need to follow up with vinegar - leave the toilet bowl with vinegar in it overnight if possible. Scrub around it and flush.
Keep in mind that pure vinegar is much stronger than vinegar essence, so use less pure vinegar and somewhat more vinegar essence. Vinegar from Västerbottenssåpa is 15% and suitable for cleaning.
3. If the toilet seat can be removed, it is a good idea to take it off. Place it on the shower floor, and also clean the underside and fittings with bathroom soap and a brush. Rinse it off and put it back.
4. Don’t forget to clean underneath the toilet tank and its base. Always use a separate cloth for the toilet. The standard practice is to use pink cloths only for the toilet.
How to get a clean and fresh sink & bathtub – step by step
Step 1: Take a scrubbing sponge
Step 2: Apply bathroom soap directly onto the sponge
Step 3: Scrub the sink and bathtub thoroughly
Step 4: Rinse with water
To keep the sink and bathtub clean every day:
Step 1: Use a soap spray - bathroom
Step 2: Spray onto the surfaces
Step 3: Wipe with a cloth
How to get sparkling clean tiled walls – step by step
Step 1: Apply bathroom soap directly to a brush
Step 2: Scrub the tiles and grout thoroughly
Step 3: Leave the soap lather on for a few minutes to dissolve the dirt
Step 4: Scrub once more
Step 5: Rinse with a damp cloth
Step 6: If desired, wipe with a dry cloth for extra shine
To keep tiled walls clean and fresh every day:
Step 1: Spray soap spray —bathroom evenly over the tiled walls
Step 2: Wipe with a clean cloth
If the grout is particularly dirty, you can use solid soap:
Step 1: Moisten the grout with lukewarm water
Step 2: Apply old-fashioned solid soap directly to a brush.
Step 3: Scrub the grout thoroughly
Step 4: Leave the soap lather on for a few minutes
Step 5: Scrub the grout again
Step 6: Rinse with a damp cloth
Clean the shower easily and environmentally friendly – step by step
Step 1: Moisten a scrubbing sponge with water.
Step 2: Apply bathroom soap directly to the damp scrubbing sponge
Step 3: Scrub the walls and shower tap thoroughly to remove dirt and deposits
Step 4: Rinse with water
Remove limescale deposits with vinegar (if necessary):
Step 1: Apply vinegar directly to areas with limescale deposits (remember that vinegar is stronger than vinegar essence, so use it with caution)
Step 2: Let the vinegar work for a while to dissolve the limescale
Step 3: Scrub if necessary
Step 4: Rinse thoroughly with water
Clean the shower floor (plastic, linoleum, click flooring, and tiles) with soap and water:
Step 1: Mix bathroom soap with 10 liters of water in a bucket
Step 2: Scrub or wet-mop the floor with the solution
Step 3: Dry the floor with a clean cloth - make sure to dry it thoroughly to prevent the floor from becoming slippery due to soap residue.
Effective bathroom cleaning with vinegar against limescale – step by step
Step 1: Moisten a cleaning sponge or an eco-fibre cloth with vinegar
Step 2: Clean the shower walls thoroughly
Step 3: Rinse with water if you want to reduce the smell of vinegar or if the surface feels sticky
Step 4: Dry with a clean cloth to avoid water spots
Remember not to use vinegar on stone or wood, as vinegar can severely damage these materials.
1. Why is the bathroom an ideal place to use soap for cleaning?
The bathroom is prone to becoming dirty with greasy grime and soap residue, which soap effectively removes due to its high pH and fat content.
2. How can you use soap to clean the toilet bowl?
For daily cleaning, you can use soap spray and a soft cloth, while deep cleaning requires applying soap directly to the toilet bowl, leaving it to work overnight, and then scrubbing with a toilet brush.
3. How can you clean tiled walls with soap?
For daily cleaning, you can use soap spray and a cloth, while heavily soiled grout can be cleaned with solid soap and a brush, followed by rinsing or wiping with a damp cloth.