5 easy steps to clean the toilet with soft soap

 

 

Step 1: Spray soap into the toilet

Remove the cap, turn the bottle upside down and spray the soap onto the inside of the toilet.

 

 

 

Step 2: Scrub with a brush

 

Use the toilet brush to scrub and create a layer of soap foam over the entire porcelain surface. Also scrub the bottom of the bowl. 

 

Step 3: Let the soap work

Leave it for 10–15 minutes, or preferably longer if you have time to wait.

Step 4: Scrub again

Then brush again with the toilet brush, and you should see the dirt coming loose.

Step 5: Flush

Flush, and your toilet will be clean and fresh.

 

 

Tips for better results and maintenance

 

How do I keep the toilet clean every week?

If you want to keep your toilet clean and looking good, try repeating this process and make it part of your weekly routine. This will make cleaning easier, as dirt will not have time to take hold in the same way it does when you wait longer.

 

How do I clean old and heavily soiled porcelain?

Perhaps you have moved into a home where the previous owners were unable to keep everything completely clean? Or perhaps cleaning has been neglected for another reason. In that case, discoloration in the bottom of the bowl can be difficult to remove. If so, repeat the first steps in the evening before going to bed – leave the soap in the toilet overnight, and the next morning you can easily scrub away the dirt and discoloration with the toilet brush.

 

What should I do about discoloration caused by metals?

If discoloration remains, it is probably not biological or greasy but caused by metal (green discoloration, for example, comes from copper pipes). You can easily remove it with acetic acid or vinegar. In the same way, let the vinegar work for a while before scrubbing with the toilet brush.

 

How soap works in the bathroom – a little basic cleaning chemistry

Dirt in the bathroom is usually biological, meaning it comes from the people who live here, animals or plants. To clean this type of dirt, you need a product with a high pH value, such as Västerbottenssåpa. Dirt in the bathroom can also be greasy. Do you remember what your chemistry teacher said?

 

Like dissolves like

For greasy dirt, a fatty soap works best – Västerbottenssåpa is superfat, meaning it contains an excess of fat while also having a high pH value, making it highly effective specifically in the bathroom.

 

When should I use vinegar instead?

 

Metals and corrosion, on the other hand, are most easily removed with something that has a low pH value. Vinegar works excellently! With this simple basic chemistry, you can handle all bathroom cleaning without harsh and unnecessary chemicals.

 

Vinegar for the toilet

 

If you have hard water and problems with limescale, it can be a good idea to occasionally pour a little vinegar into the toilet, let it sit for a while, then scrub around with the toilet brush and flush.

 

What does the bathroom soap contain?

 

The bottle contains 0.5 L of liquid soap. You will notice that the soap is thicker and more viscous than you may be used to; this is because it is more concentrated, so 0.5 L lasts a very long time. This superfat soap is ideal for cleaning the bathroom, where dirt is greasy or consists of soap or skin residue. The bathroom soap also prevents the regrowth of fungi and mold in bathrooms and shower areas.

 

 

How do I use it for mopping?

 

Dosage when diluted in water for wet mopping: 2–6 tbsp per 10 liters of warm water.

Wood and stone also benefit greatly from being reconditioned with soap. For untreated wood, use more soap. This will give the surface a soft, warm and treated finish.

For “dead materials” such as plastic or vinyl flooring, use less soap and hotter water. Do not leave soap residue on wet floors, as this may cause slipping. For plastic and other non-natural materials, use a degreasing dishwashing detergent every fourth wet mopping to remove any excess fat from the soap.

 

__________________________________________________________________________

Questions and Answers 

 

- How do you begin the process of cleaning the inside of the toilet with soap?
To begin cleaning, remove the cap from the soap bottle, turn the bottle upside down and spray the soap onto the inside of the toilet.

 

- Why is mechanical cleaning important when cleaning the inside of the toilet?
Mechanical cleaning, which means actually scrubbing the surface, is important because it helps loosen and effectively remove dirt and stains.

 

- How long should you let the soap work in the toilet before scrubbing again?
It is recommended to let the bathroom soap work for 10–15 minutes, or preferably longer if possible, before scrubbing again with the toilet brush.

 

- What tip do we have for dealing with heavily soiled porcelain in the toilet?
If the porcelain is heavily soiled and discolored, you can leave the bathroom soap in the toilet overnight before scrubbing away the dirt with the toilet brush.

 

- How do you remove discoloration caused by metals in the toilet?
Discoloration caused by metals, such as copper, can easily be removed with acetic acid or vinegar. Let the vinegar work for a while before scrubbing with the toilet brush to effectively remove the discoloration.

 

 

Order bathroom soap here

See Västerbottenssåpa’s Kit for a Clean, Limescale-Free Bathroom